Handle Containers Anywhere, Anytime, For Less

Introducing the C-Lift M Series, the most affordable container lifting jack in the BISON range. With no electronics or hydraulics to maintain, the M Series is a reliable performer for relocating containers and sites handling low container volumes. If portability and easy maintenance are your priorities the M Series is simple, cost effective and gets the job done.

  • Packs down for easy transport
  • Easy to assemble, safe to use 
  • Lifts up to 20 tonne 
  • Simple mechanical design
  • No power supply needed

Watch it in action

Packs Down Inside Container

Integrating a solid, safe and sturdy A-frame design with certified chain hoists, the M Series is easy to set up, and takes a fit team less than 10 minutes to lift a container. No hydraulics, electronics or external power supply required. The tripod base gives stability on rough ground and wheels make the A-frames portable after they're assembled. The M Series packs down into a compact unit for transport, either on a pickup truck or inside the container itself. Or see the M Series Transport frame accessory below, for a complete transport solution.

M Series Specifications

Models & lift capacity
C-Lift M20 - 20,000 kg (44,000 lb)
C-Lift M10 - 10,000 kg (22,000 lb)
Optional extras
Weight sensors
Service kit
Standard components
4 x lifting frames
4 x certified chain hoists
Lift height
C-Lift M20 - 165 cm (65 in)*
C-Lift M10 - 175 cm (69 in)*
Reversing clearance
50 cm (20 in)
Leg weight
130 kg (286 lb)
Total weight
650 kg (1,433 lb)
Packed dimensions
222 cm x 113 cm x 70 cm
(87 in x 44 in x 28 in)
Minimum operators
Lightweight, high strength steel
Quality coatings for corrosion protection
Puncture-proof rubber tyres
Chain hoists
Individual chain hoists rated for 50% of system load limit
Full force on chain to lift at full load ca. 35 kg (80 lb)
Full force on chain to lower at full load ca. 15 kg (33 lb)
Special features
Adjustable base for stability on rough ground
Lifting frames disassemble and pack into compact unit
Can be transported in container, on truck, or on a ute.
Longest component fits inside across width of shipping container.
* Lift height with optional weighing sensors: 10cm (4") less

M Series Transport Frame

The Transport Frame is an optional accessory for transporting the C-Lift M Series in a single, reusable, palletised unit. Designed for moving the C-Lift efficiently by land, air and sea, the Transport Frame features a sturdy steel base with fork pockets, custom brackets, rubber pads and ratchet tie downs for securing the system, plus rugged cargo boxes for housing the chain hoists. An easy to follow Packing Video, plus written Packing Instructions are supplied with the kit for easy unpacking and re-assembly. 

Certified design

CE certified and designed to EN 1494:2000+A1:2008.

Quality Engineering

Constructed with high strength steel and first class materials.

Performance tested

Proof-tested to 150% of working load limit prior to delivery.

Full training

Comprehensive videos and personalised training available.

Dedicated support

Dedicated customer support available from BISON and/or local suppliers.

5 year warranty

5 year warranty on structural components. Conditions apply.

Talk with our Expert Team

Change Language