Skip to main content
Contact us
3010 T30 1920x700 Banner
Self Lifting Container Legs

C-Lift T Series

Give your containers legs, and your team self-sufficiency with the Bison C-Lift T Series, a modular container lift system that retrofits to a variety of ISO containers.

Mobilize Your Containers

For total independence, the C-Lift T Series equips you to rapidly deploy valuable containerized assets, without the costs, delays, and downtime that come from relying on third-party vendors.

With lift capacities of up to 30 tonne or 66,000 lbs, the T Series is an ideal solution for defense applications, field services, emergency response, event logistics, and containerized energy.

Putting You in Control

Website icons design 0912 10

Mobilize Containers

Website icons design 0912 11

Make Containers Self Sufficient

Website icons design 0912 01

Eliminate Crane Hire

Website icons design 0912 13

Avoid Delays And Downtime

Website icons design 0912 12

Lower Transport Costs

C-Lift T Series

  • Legs Travel With The Container
    3002 T30 865x487 Mosgiel Shoot

    The legs stow safely at the front and rear of the container during transport, staying inside regular vehicle width limits.

  • Quick and Easy to Deploy
    3004 T30 865x487 Mosgiel Shoot

    To deploy, the legs are simply swung into position and locked in place with a two-bolt brace. The lift is controlled by a wireless handheld remote.

  • Self levelling control system
    Bison Container Lifting Legs with container in the air

    Onboard sensors control the pumps and motors, keeping the container level and each leg synchronized. The default mode is self-leveling, however, the operator can select and control individual legs, or groups of legs, if required.

  • Works on uneven ground
    3008 T30 865x487 Mosgiel Shoot

    An articulating footplate gives the T Series a stable base for lifting containers on rough, loose, and uneven surfaces.

  • Lift capacity up to 30 tonne | 66,000 lbs
    3006 T30 865x487 Mosgiel Shoot

    The T Series is available in two lift capacities. The C-Lift T20 with 20 tonne | 44,000 lbs working load limit. And the C-Lift T30 with a 30 tonne | 66,000 lbs working load limit.

  • Legs Bolt To Corner Castings
    3003 T30 865x487 Mosgiel Shoot

    The four telescopic lifting legs bolt securely to the ISO corner castings, without modifying the container structure. The legs can be detached and transferred quickly and easily between containers.

C-Lift T Series

  • Hydraulic Counterbalance Valves
    3005 T30 865x487 Mosgiel Shoot

    Hydraulic counterbalance valves ensure the container will stay elevated in the event of an unexpected power outage or hydraulic failure.

  • Wireless Remote
    3026 865x487 T30 Containre Lifting Bison Remote

    A wireless handheld remote control allows the operator to move freely, monitor each lift, and remain a safe distance from the elevated container.

  • Emergency Stops
    3027 865x487 T30 Containre Lifting Bison Emergency Stop

    An emergency stop button on the remote will stop the T Series on demand. A second hardwired emergency stop button can be positioned on the ground, a safe distance from the elevated container.

  • Safety rated control system
    3011 T30 865x487 Mosgiel Shoot

    A safety rated control system, with dual channel redundancy, controls the pumps and motors, keeping the container level and each leg synchronized.

  • Quality Construction
    3015 T30 865x487 Mosgiel Shoot

    The T Series legs are constructed from high-strength structural steel and are physically proof tested to 150% times their working load limit before shipping.

Models C-Lift T20 C-Lift T30
Lift Capacity 20,000 kg 30,000 kg
Lift Height 165 cm
Reversing Clearance 50 cm
Leg Weight 220 kg 260 kg
Operating Temperature -10°C to +40°C
IP Rating Portable HPU IP54. Mounted HPU IP56.
Standard Power Supply External electric supply, from portable generator or mains. 207 - 240 VAC, 50 - 60 Hz, 10 - 15 Amps
Alternative Power Supply Built in 24V DC rechargeable battery pack. Only available with T20 Mounted HPU. Charge with 110V - 240V, 50 - 60 Hz, 10 - 15 Amps.
Construction High strength structural steel. Each leg is factory proof tested to 150% x rated load. Off the shelf hydraulics, for easy servicing. Zinc-plated exterior, for long life cycle.
Design Standard CE compliant and designed in accordance with BS EN 1494:2000+A1:2008, the British Standard for mobile or moveable jacks.
8000 J Immy 664x424

Dedicated Support

Bison engineers stand ready to support your team and technicians. This support is enhanced by remote diagnostic capabilities built into all automated C-Lift T Series. Using a smartphone app, your team can connect Bison engineers to your C-Lift T Series, allowing us to investigate issues if they arise, reset the firmware, and provide expert advice at low or no cost, no matter where you are in the world.

8002 Mark Ian 865x487

Comprehensive Training

With every C-Lift T Series, you'll receive a series of detailed Training Videos - covering safety, key components, how to set the T Series up, safe operation, and reversing safety. Each video is accompanied by a short online test, so that you can train, test, and certify your T Series operators, and take confidence knowing they are familiar with the equipment and how to use it safely.

8001 Shashank 865x487

5 Year Limited Warranty

All Bison C-Lift T Series are covered by a 5-year limited warranty on structural components, and a 1-year limited warranty on other components. Our product development and production processes combine first-class engineering, industrial-strength components, and rigorous manufacturing, to deliver quality equipment you can trust to perform in the toughest conditions.

HPU With Hoses webiste edit 02 B
Hydraulic Power Unit

Multiple Options

No two modified containers are the same, so we offer multiple hydraulic power pack options to fit with your container design. The HPU may be mounted on the roof, the internal or external walls. Or you may prefer a portable HPU to sit alongside the container. Talk with our team to learn more.

3015 T30 865x487 Mosgiel Shoot

Trusted to perform

Bison combines first-class engineering, industrial strength components and rigorous manufacturing, to deliver quality equipment you can trust to perform in the toughest conditions.

3002 T30 865x487 Mosgiel Shoot

Putting you in control

With Bison you'll get more self sufficiency and control over your operations, and the freedom to lift and weigh containers without relying on contract cranes, truck scales and heavy handling equipment.

3012 T30 865x487 Mosgiel Shoot

From solutions to support

Working with Bison means exceptional service at every touch point, from our multi-lingual sales team, to our comprehensive training and global support network.

Need Equipment Financing?

Fast and flexible credit process for US based customers.
100% finance available.

Learn More